MOPAR PERFORMANCE 
FUEL SYSTEM PARTS

HOLLEY CROSS RAM CARBURETORS

Holley Carburetors were the "go fast" choice for the legendary Super Stock 426 Hemi® engine. Mopar brings back these original equipment Holley carburetors for 1964, 1965 and 1968 race Hemis. These are exact reissues of the original carburetors. Airflow is 770 cfm.

Cross Ram Carburetor — Right Hand (1964-65, 1968 Race 426 Hemi)

$ 809.95

Cross Ram Carburetor — Left Hand (1964-65, 1968 Race 426 Hemi) 

$ 809.95

AIR HORNS

For use with Holley Cross Ram Carburetors. Perfect for Super Stock competition or restoration. Sold as a pair (front and rear).

Air Horns, 1964-65 426 Hemi, 1968 Super Stock 426 Hemi

$ 529.95

CROSS RAM LINKAGE

Use with Hemi® Cross Ram Intake Manifold (P5007534) and Holley Carburetors (P4452778 and P4452779).

Linkage, Cross Ram, Hemi

$ 599.95

MECHANICAL FUEL PUMPS

Provides higher delivery rate than stock at 80 gph @ 8.7 psi. unless otherwise stated

P4529368

Fuel Pump, Mechanical, 65 GPH at 6.5 to 8 PSI Running at 800 RPM, A-Engine

$ 94.95

FUEL PUMP PUSHROD

Fuel Pump Pushrod (426 Hemi® and Big Block)

$ 54.95

MOLY COATED FUEL PUMP ECCCENTRIC

The moly coating on this Fuel Pump Eccentric significantly reduces friction and wear.

Moly-Coated Fuel Pump Eccentric (Small Block)

$ 59.95

CHROME FUEL PUMP BLOCK-OFF PLATE

Covers the hole created when removing the mechanical fuel pump for replacement with electric pump. Gasket included.

Chrome Fuel Pump Block-Off Plate

$ 19.95

CARTER ELECTRIC FUEL PUMP

This high-volume Electric Fuel Pump provides a delivery rate of 72 gph @ 7.0 psi.

Carter Electric Fuel Pump

$ 199.95

TALL THROTTLE BRACKET

The Tall Throttle Bracket is used to attach the throttle spring to Mopar M1® single plane intake applications or when using a 1" carb spacer.

Tall Throttle Bracket (Big Block)

$ 67.95

CARBUREATOR KICKDOWN BRACKET

Kickdown Bracket is for use with automatic transmission kickdown cable (P4510646)

Carburetor Kickdown Bracket (Big Block)

$ 46.95

MAX WEDGE INTAKE LINKAGE PACKAGE

For use with Max Wedge Intake Manifold (P5007330) with Carter AFB Carburetors or Edelbrock Performer Series Carburetors

Linkage Kit, Max Wedge Intake Manifolds

$ 369.95

TALL RETURN SPRING BRACKET

This Tall Return Spring Bracket is for use on Mopar M1 single plane intake applications or when using a 1" carb spacer.

Tall Return Spring Bracket (Big Block)

$ 30.95

THIN CARBURETOR ADAPTOR

Designed with air/fuel flow technologies in mind versus ease of machining. Tested and used by top engine builders, these adapters are only 1/16-inch thick and allow the use of square bore carburetors on spread bore manifolds.

Thin Carburetor Adapter (Big Block and Small Block)

$ 22.95

ACCELERATOR RETURN SPRING BRACKET

Accelerator Return Spring Bracket is designed for Magnum crate engines with 4-bbl carb Intake Manifolds. Developed to hold accelerator pedal return spring in proper relationship to Carburetor. 

Accelerator Return Spring Bracket (4-bbl 300, 380, 395, 435 Magnum Crate Engines) 

$ 16.95

CABLE MOUNTING BRACKET

Designed to hold the stock throttle cable to Mopar Performance Magnum Intake Manifold. Will hold throttle cable in proper relationship to carburetor. Includes hardware.

Bracket, Throttle Cable, Magnum 300/ 380/ 395/ 435 Crate Engines with Carburetor

$ 32.95

Bracket, Throttle Cable, Used with Magnum V8 W/CARB, Single Plane 4BBL

HEMI THROTTLE CABLE

A Throttle Cable for Street Hemi applications. Includes the retaining clip and a plug to finish the installation.

Throttle Cable, 19 3/4" Long, 1968–70 Hemi B-Body 

$ 149.95

SIX PACK HOLLEY CARBURETORS

These carburetors are exact reissues of the original equipment Six Pack. Order one center and two outboard carburetors to match your engine. Six Pack "A" engines use intake manifold P4529054. Six Pack "RB" engines use intake manifold P4529056.

Holley Carburetor— Center (1969-70 Big Block Six Pack)

$ 699.95

Holley Carburetor — Outboard (1969-70 "RB" Six Pack)

$ 499.95

Holley Carburetor — Center (1971 "RB" Six Pack MTX)

$ 775.95

Holley Carburetor — Outboard (1971 "RB" Six Pack)

$ 499.95

Holley Carburetor — Outboard ("B" Six Pack and Small Block Six Pack)

$ 439.95

Holley Carburetor — Center (Small Block Six Pack ATX)

$ 529.95

SIX PACK SECONDARY DIAPHRAGM SET

This Secondary Diaphragm Set is for use with Six Pack Holley 2-bbl outboard carburetors. Sold individually.

Secondary Diaphragm Set (Six Pack)

$ 59.95

SIX PACK GASKET SET

This gasket set includes O.E. gaskets made exactly the way they were produced in the early 1970s. Set includes 3 premium quality air cleaner gaskets and 3 premium quality carb-to-manifold gaskets. Fits all 6-bbl applications.

Gasket Set (Six Pack)

$ 44.99

SIX PACK CHOKE THERMOSTAT ASSY

Reproduction O.E. Choke Thermostat Assembly. Fits all production 6-bbl applications.

Choke Thermostat Assembly (Six Pack)

$ 149.95

SIX PACK INSTALLATION KITS

Installation Kits include throttle cables, fuel lines, coil brackets, linkage kit, nuts, springs and washers. Buy the 6-bbl carbs, manifold and air cleaner, then install them with this complete O.E. reproduction kit.

Six Pack Installation Kit (Small Block)

$ 499.95

Six Pack Installation Kit (Big Block)

$ 499.95

SIX PACK LINKAGE KIT

This Six Pack Linkage Kit is perfect for repair or restoration projects. The kit includes front carb rod, rear carb rod, front and rear clips, adjusting pivot, throttle cable, bolt, nut, clip and washer assembly.

Six Pack Linkage Kit

$ 139.95

CARBURETOR ADAPTER

Adaptor to install Thermoquad carburetor to either a Holley 4 barrel or Carter AVS 4 barrel bolt pattern manifold 

$ 49.95