1962-1976 DODGE & PLYMOUTH INTERIOR TRIM, WINDOW & DOOR HARDWARE

 

Check out our New Lower Pricing!



INTERIOR REAR WINDOW TRIM
 All window trim sets are pre-bent and ready for easy installation. They are made of the highest quality materials that prevent sun and heat from destroying it. Available in black only, but is paintable to match your car's interior.
1968-1970 Plymouth Roadrunner, GTX & Satellite

TP-MP5111
TP-MP5111 4 Piece Set includes lower piece $ 119.95

TP-MP5110
TP-MP5110 3 Piece Set only; does not include lower piece $ 89.95

TP-MP5112 
TP-MP5112 Lower Window Rear section only $ 59.95
 
1968-1970 Dodge Coronet R/T & 440

TP-MP5101
TP-MP5101 5 Piece Set; includes lower corners $ 119.95

TP-MP5100
TP-MP5100 3 Piece Set only; does not include lower corners or lower section $ 119.95

TP-MP5102
TP-MP5102 Lower Rear Window Corners only $ 54.95

TP-MP5103
TP-MP5103 Lower Rear Window Section only $ 59.95
 
1968-1970 Dodge Coronet

TP-MP5104
TP-MP5104 6 Piece Set $ 129.95
 
1968-1970 Dodge Charger

TP-MP5128 
TP-MP5128 6 Piece Set $ 129.95

TP-MP5125 
TP-MP5125 4 Piece Set only; does not include lower corners $ 119.95

TP-MP5129 
TP-MP5129 Lower Rear Window Corners only $ 69.95

TP-MP5126 
TP-MP5126 Lower Rear Window Section only $ 49.95
 
1969 Dodge Daytona & Charger 500

TP-MP5121 
TP-MP5121 6 Piece Set $ 119.95

TP-MP5120 
TP-MP5120 3 Piece Set only; does not include lower corners or lower section $ 89.95
 
1964-1965 B Body Hardtop & 2/4 Door Sedan

TP-MP5050 
TP-MP5050 3 Piece Set $ 109.95

 


 

MR-71E

INSIDE REAR VIEW MIRRORS

  

MR-689A
MR-70E 1970 All E Body $ 149.95
MR-71E 1971 All E Body $ 149.95
MR-72E 1972 All E Body $ 149.95
MR-70B 1968-1970 All B Body $ 149.95
MR-714B 1971-1974 All B Body $ 149.95
MR-689A 1968-1969 All A Body $ 149.95
MR-70A 1970 All A Body $ 149.95
MR-71A 1971 All A Body $ 149.95
MR-72A 1972 All A Body $ 149.95
MR-734E 1973-1974 All E Body $ 149.95
MR-734A 1973-1974 All A Body $ 149.95


 
Vent Cable with Handle 
Entire Cable with Handle

INSIDE VENT CABLES WITH HANDLE 

Vent Cable Handle 
Closeup of 70-Down Handle
RP-FP307 70 Cuda & Challenger - Right $ 59.95 ea.
RP-FP306 70 Cuda & Challenger - Left $ 59.95 ea.
RP-FP311 71-74 Cuda & Challenger - Right (round pull handle) $ 59.95 ea.
RP-FP310 71-74 Cuda & Challenger - Left (round pull handle) $ 59.95 ea.
RP-FP314 66-67 All B Body - Right (cars w/o AC only) (round knob) $ 64.95 ea.
RP-FP315 66-67 All B Body - Left (cars w/o AC only) (round knob) $ 64.95 ea.
RP-309 68-70 All B Body - Right (cars w/o AC only) (square knob) $ 59.95 ea.
RP-308 68-70 All B Body - Left (cars with & w/o AC) (square knob) $ 59.95 ea.
RP-FP313 71-74 All B Body - Right (round pull handle) $ 59.95 ea.
RP-FP312 71-74 All B Body - Left (round pull handle) $ 59.95 ea.

 

SEAT BELT COMPONENTS


KQ-SB1BLK


KQ-SB2


KQ-SB3

KQ-SB1BLK

Complete Front/Rear Seat Belt Clip Set w/ screws - Black

1968-69 (some 70) A & B Body w/ Frt Bench Seat

$ 54.95/set

KQ-SB1WHT

Complete Seat Belt Clip Set - Front/Rear Set w/ screws - White

1968-69 (some 70) A & B Body w/ Frt Bench Seat

$ 54.95/set

KQ-SB2BLK

Complete Seat Belt Clip Set - Front/Rear Set w/ screws - Black

1968-69 (some 70) A & B Body w/ Frt Bucket Seat

$ 54.95/set

KQ-SB2WHT

Complete Seat Belt Clip Set - Front/Rear Set w/ screws - White

1968-69 (some 70) A/B w/ Frt Bucket Seat

$ 54.95/set

KQ-SB3BLK

Bench Seat Belt Clips (pr) - Black

1968-1969 A & B Body

$ 32.95/pr.

KQ-SB3WHT

Bench Seat Belt Clips (pr) - White

1968-1969 A & B Body

$ 32.95/pr.


KQ-SB4


KQ-SB5


KQ-SB6

KQ-SB4BLK

Bucket Seat Belt Clips (pr) - Black

1968-1969 A & B Body

$ 29.95/pr.

KQ-SB4WHT

Bucket Seat Belt Clips (pr) - White

1968-1969 A & B Body

$ 29.95/pr.

KQ-SB5

Seat Belt Guides 

70 Chall & Cuda

$ 24.95/pr.

KQ-SB6

Front Seat Belt Mount Covers "Rubber" "Drive Shaft Tunnel" 

1967-70 A & B Body

$ 31.95/pr.


KQ-SB7

KQ-SB7

Front Shoulder Harness Mounting Cover

1967-70 A & B Body & 1970-74 E Body

$ 39.95/pr.

 

RALLYE HEATER CONTROL CONSOLE 

KQ-HCP

1970-1974 E Body without air with Rallye Dash Only 
 (as pictured; does not include switches, levers or cables)

In Stock Call

 

DASH BEZELS
Dash Bezels
DT-V2L064		 Dash Bezels
DT-V2L164
DT-V2L164 1964 Barracuda/Valiant Switch Bezel $ 139.95
DT-V2L064 1964 Barracuda/Valiant Dash Bezel $ 219.95

 

CONSOLE REAR TRIM PLATE
Console Rear Trim Plate
NEW!
DT-VTRM670		 1968-70 Charger, 66-70 All C Body, 66-70 Roadrunner/GTX/Coronet,
69 Daytona & 70 Superbird 		$ 259.95

 

 

EMERGENCY BRAKE HANDLE

Injection molded to reproduce every detail and curve. Made of hi-tech polymer, makes product even stronger than originals. BRAKE lettering detailed in white as original. Fits on all cars with 9/16" shaft and roll pin. Roll pin hole drilled for proper alignment. New roll pin included for installation.


HF-549
BR-233

HF-549

1968-74 All A Body (also fits 67 & earlier cars; replaces part number 2823549)

$ 49.95
BR-233 1970-74 All E Body 

$ 69.95
BR-234  1968-70 All B Body 

$ 69.95
BR-235 1971-74 All B Body

$ 69.95

REAR SPEAKER FADER KNOB & BEZEL

  
DT-VWC774 1971-74 E Body $ 59.95

 INTERIOR WOODGRAIN COMPONENTS


DASH INSTRUMENT PANEL WOOD GRAIN
  
These are the adhesive backed wood grain pieces that surround the dash gauges. For E Body, be sure to make note there are two different types for each year. One has three switches on the left hand switch panel: headlight, windshield wipers and dimmer; the other has four switches on the left hand switch panel: headlight, windshield wipers, dimmer and convertible top. Note: the odometer trip meter knob goes through the wood grain on 70-71 E Body cars, and through the plastic speedometer lens on 72-74 E Body cars.

***These are the simulated woodgrain adhesive backed pieces only! "Not" the plastic gauge surround fascia
and switch fascia pieces themselves that are made of plastic!

CL-051

70-71 E Body 

w/ 3 switches on left hand switch panel - Rallye dash only 

$ 49.95/set

CL-052

70-71 E Body

w/ 4 switches on left hand switch panel - Rallye dash only 

$ 49.95/set

CL-053

72-74 E Body

w/ 3 switches on left hand switch panel-Rallye dash only 

$ 49.95/set

CL-054

72-74 E Body

w/ 4 switches on left hand switch panel-Rallye dash only 

$ 49.95/set

DOOR PANEL WOODGRAIN
These adhesive backed wood grain pieces replace those old and faded wood grain sections of your door panels. Correct wood grain pattern and color; just peel and they self stick to door panels with ease! (sold in pairs).

MS-1340

70-74 Challenger

$ 39.95/pr.

SR-180940W

70 B Body w/ remote mirror

$ 59.95/pr.

SR-180940N

70 B Body w/o remote mirror

$ 59.95/pr.

RADIO WOODGRAIN

These adhesive backed wood grain pieces replace those old and faded wood grain sections of your dash. Correct wood grain pattern and color. This is the adhesive only.

SR-180906

70 Coronet

$ 46.95

SR-180907

69 B Body Rallye

$ 48.95

SR-180908

70 B Body Rallye

$ 48.95

SR-180909

69-70 B Body Tape Deck

$ 48.95

RIGHT HAND DASH PANEL WOODGRAIN ADHESIVE 

SR- 180910

69-70 B Body

$ 44.95

LEFT & RIGHT SIDE PANEL WOODGRAIN ADHESIVE

SR-180911

69-70 B Body 

$ 39.95/pr.

CONSOLE WOOD GRAIN REPLACEMENT KITS
Die cut wood grain material with adhesive backing replaces the woodgrain on thoseold scratched & worn console tops. Pre-cut for easy installation. 

SP-919

70-74 Cuda/Challenger & 71-74 Charger/Roadrunner

Automatic

$ 37.95

SP-920

70-74 Cuda/Challenger & 71-74 Charger/Roadrunner

4 Speed

$ 37.95

SP-1153

69-70 All B Body

Automatic

$ 37.95

SP-1154

69-70 All B Body

4 Speed

$ 37.95

SR-180186

67-69 Barracuda, Dart & Valiant

Automatic

$ 37.95

SR-180188

67-69 Barracuda, Dart & Valiant

4 Speed

$ 37.95

SP-4283

70-75 All A Body

Automatic

$ 37.95

SP-4284

70-75 All A Body

4 Speed

$ 37.95

CONSOLE WOODGRAIN SHIFTER PLATE SCREW KITS

SH-469

70-74 Cuda & Challenger & 71-74 B Body

$ 19.95/kit


LC-V69LC
IGNITION LOCK CYLINDER AND DOOR LOCK SET
Includes two door lock cylinders, ignition lock cylinder, two lock cylinder retainers, two gaskets and two keys that are keyed alike. 
 
LC-V69LC

All 69 Bodies

 $ 99.95
6 All 66-68 Bodies $ 99.95

IGNITION CYLINDER LOCK RING/BEZEL/NUT
LC-V68LR All 66-68 Bodies $ 59.95
LC-V69LR

All 69 Bodies

 $ 59.95

DASH GLOVE BOX LOCK & KEY PKG


LC-4453D

LC-1141US

1970-74 All Cuda & Challenger (with chrome knob) - Used

 Out of Stock

LC-4453D

1971-74 All B & C Body (with chrome knob)

$ 124.95 ea. 

TRUNK & DASH GLOVE BOX LOCK & KEY PKGS

LC-314

1970-72 Challenger

$ 139.95/pkg.

LC-711

1973-74 Challenger

$ 79.95/pkg.

LC-314

1970-72 Dart (HT)

$ 139.95/pkg.

LC-672

1970-72 Dart (Fastback)

$ 89.95/pkg.

TRUNK LOCK & KEY PKGS

LC-1038

All 1966-71 A/B/E Bodies (does not fit 1970-74 Cuda)

$ 39.95/pkg.

LC-1038CH

1972 Challenger

$ 54.95/pkg
LC-1038CHB 1973-74 Challenger $ 64.95/pkg

DOOR LOCK CYLINDER & KEY PKGS
(includes 1 door cylinder and 1 key)

LC-1003

66-76 All Year, Make & Model

$ 19.95/pkg.


IGNITION SWITCH W/ LOCK CYLINDER & KEYS


LC-173

LC-173

1962-1968 All Make & Models
(Ignition switch with keys only as shown above)

$ 89.95

IGNITION SWITCH W/ CYLINDER & 2 DOOR LOCKS (KEYS MATCHING) 
 
LC-V68LC2
LC-V68LC2 1966-1968 All Make & Models
(includes ignition switch and cylinder, keys, door lock cylinders, gaskets  and retainers)
 $ 159.95



LC-V69LC2
LC-V69LC2 1969 All Make & Models
(includes ignition switch and cylinder, keys, door lock cylinders, gaskets  and retainers)
 $ 159.95


LC-436

LC-436

1970-1971 All Make & Models

$ 59.95


LC-471

LC-471

1972-1985 All Make & Model

$ 49.95

IGNITION SWITCH/LOCK CYLINDER & DOOR LOCK CYLINDER SETS
LC-473 1969 All Make & Models $ 149.95

IGNITION SWITCH WITH WIRING
The switch with wiring that runs down the steering column w/ connector. For fixed and tilt wheels.

EL-1315

70-76 All Make & Models

$ 119.95

BLANK IGNITION & DOOR LOCK KEY
LC-816 Original Mopar

$ 8.95 ea.

BLANK TRUNK LOCK KEY

LC-817

Original Mopar

$ 8.95 ea.

TRUNK & DOOR LOCK CYLINDER RETAINER

LC-320

A/B/E Bodies

$ 5.95 ea.

TRUNK LOCK CYLINDER NUT

LC-1923

72-Up All E Body & Various other models (threaded spin-on style)

$ 13.50 ea.

LOCK CYLINDER SEALS

LC-319

64-72 All M & M Trunk & 64-76 All M & M Door

$ 6.95 ea.

LC-1290

73-Up All M & M Trunk

$ 8.50 ea.
DOOR LOCK LINK RODS
Connect door lock cylinder levers to the door latch assembly.
HF-7789 1967-72 A Body 2 Dr $ 34.95/pr.
HF-2101 1968-70 B Body $ 34.95/pr.
HF-4045 1970-74 E Body $ 34.95/pr.

GLOVE BOX LATCH ASSEMBLY


LC-4453B

LC-4453

70-74 E Body - New
(latch & lock case assembly that attaches to the inside of the glove box door)

$ 149.95 ea.
LC-4453U 70-74 E Body - Used
(latch & lock case assembly that attaches to the inside of the glove box door)

Sold Out

LC-4453B

71-74 All B Body - New
(latch & lock case assembly that attaches to the inside of the glove box door)

$ 129.95 ea.

LC-4453C

71-74 All C Body - New
(latch & lock case assembly that attaches to the inside of the glove box door)

$ 139.95 ea.

 

ASH TRAY COMPONENTS

MS-4338

 Cigarette Lighter Assembly, complete (includes element, housing and mounting clamp) - Fits all Year, Make & Model A, B & E Body cars

$ 39.95

 

 

STEERING WHEELS
REPRODUCTION TUFF STEERING WHEEL

This tuff steering wheel is an exact reproduction of the same wheels that came on Dodge & Plymouths! Made of molded vinyl. Includes horn center pad, switch & horn switch screws. Installation kits below are not needed for the installation of this wheel. Fits directly on cars that originally came with tuff steering wheels!

Tuff steering wheel adaptors sold below!

ST-6307

Dodge & Plymouth
Fits 70-74 Barracuda, Challenger; 70-Up Dart, Dart Sport, Demon, Duster, Scamp, Swinger, Valiant, Superbee, Superbird, Charger, Coronet, GTX, Roadrunner, Satellite & Belvedere
(for 70-Up A body cars that did not come with a Tuff wheel, adaptor piece required (sold separately). Will not fit 69-Down A Body cars.

$ 329.95 


   
NEW!
TUFF STEERING WHEEL ADAPTOR
ST-6307CAN 1970-1974 A & B Body Tuff Wheel Adaptor (Repro)
This piece is needed to mount the Tuff Wheel above		 $ 259.95 

AFTERMARKET STEERING WHEELS
 These steering wheels are universal wheels. Installation kits below must be purchased to install these aftermarket wheels on to the various models (with the exception of the Barracuda & Challenger [see **note below]).

SILVER TUFF STEERING WHEEL

This aftermarket of the popular "Tuff" steering wheel is slightly different in appearance than the original but is very similar.  Silver color spokes. Includes center cap.

ST-95687

Fits any Year, M & M (order installation kit below by specific application) Outside diameter 14" - Silver

$ 99.00

BLACK TUFF STEERING WHEEL

The same styling as the above wheel only spokes are black instead of silver. Includes center cap.

ST-95687B 

Fits any Year, M & M (order installation kit below by specific application)  Outside diameter 14" - Black

$ 99.95

  ** Both silver & black Tuff wheels can be used on Barracuda & Challenger with some minor re-drilling of the Tuff wheel base to accommodate the bolts on the existing steering column. Original accordian can must be used on these models and cannot be eliminated. Your old steering wheel can be used back to back with the new Tuff wheel as a template for new location of holes; no installation kit is needed for Barracuda & Challengers.    

HORN SWITCH 
This horn switch is held on by three screws and attaches to the center of the steering wheel.		 Horn switch
ST-HBCA 1970-74 E Body & 71-74 B Body - Fits ST-95687 & ST-95688R steering wheels. $ 79.95

 

CLASSIC "RIM BLOW LOOK" STEERING WHEEL 


This 15" genuine wood grip reproduction wheel has the look of the rim blow wheel (does not have the functioning rim blow switch in it). Spokes have a nickel plate finish. This is a direct bolt on steering wheel for all 70-74 Cuda & Challenger; no steering wheel adaptor needed. 

Must use your old horn switch located in the center of wheel, to utilize the horn function.

ST-95688R 70-74 Cuda & Challenger In Stock    $299.95

 

Black Steering Wheel

BLACK STEERING WHEEL

If your steering wheel is cracked, faded or badly damaged, replace it with this high-quality reproduction. Helps your interior look like new.
MP-5153385 68-69 Dodge & Plymouth Charger, Coronet, GTX, Roadrunner, Barracuda & Dart $ 499.95

 

STEERING WHEEL INSTALLATION KITS

These installation kits allow you to install Tuff steering wheel (ST-95687 or ST-95687B) to the specific make and models shown below. (Please specify exact year, make & model you are installing on)

MS-4310

All 1961-66 Models*

$ 69.95 ea.

MS-4312

All 1967 Models*

$ 69.95 ea.

MS-3313

All 1968-69 Models*

$ 69.95 ea.

MS-3314

All 1970-76 Models* (except 70-74 B-Body & 70-74 Barracuda & Challenger**)

$ 69.95 ea.

** Tuff wheel can be used on Barracuda & Challenger with some minor re-drilling of the Tuff wheel base to accommodate the bolts on the existing steering column. Accordion can must be used on these models and cannot be eliminated. Your old steering wheel can be used back to back with the new Tuff wheel as a template for new location of holes.

 

REPRO HORN CENTER PAD

  
DT-VPAD687 1968-70 A & B Body $ 149.95

 

ORIGINAL USED HORN CENTER PADS
These rare hard-to-find used original horn pads are in excellent condition ready to install.

  
US-HCD		  
US-HCC
US-HCD Various Year A & B Body Center Horn Pad w/ Dodge $ 245.00
US-HCC 1967-69 Barracuda Center Horn Pad w/ Fish $ 245.00

 

Roadrunner HORN PAD CENTER EMBLEM

HF-RRPAD

69-70 Roadrunner (w/ standard wheel). This correct injection molded part has the proper silver border and premium Roadrunner decal already installed. Don't confuse this part with those from other suppliers that are only available as two separate pieces! This piece is a complete decal and lens assembly! 

$ 25.00 ea.

 

STEERING WHEEL CENTER FISH EMBLEM
Fish emblem that goes in the center of the horn pad of the rim blow steering wheel.

MS-6720

70-71 Barracuda

$ 59.95

STEERING WHEEL CENTER HORN PAD INSERT

DODGE horn pad insert for rim blow steering wheels.


MS-6722

70-71 Challenger & 71-72 Charger/Coronet/Superbee
(Insert only; cap not included)

$ 69.95 ea.

STEERING WHEEL CENTER CAPS
For rim blow steering wheels.


MS-6720CAP 

MS-6720CAP

70-71 Barracuda (with fish emblem in center)

$ 369.95 ea.

 
MS-6721CAP

MS-6721CAP

70-71 Challenger & 71-72 Charger/Coronet/Superbee (with Dodge round aluminum insert)

$ 299.95 ea.

 

 

HORN PAD RETAINER KITS

HF-2491
HF-6704

HF-2491

This quality reproduction horn pad retainer kit is cut from the correct gauge steel and zinc phosphate and oiled to prevent corrosion.  Includes three 8-32 zinc plated mounting screws and correct 1/4-20 hex coni SEMS bolt to mount the horn pad to the plate.  Used on 1969 A & B-Body 3-spoke plastic steering wheels, applications w/o simulated wood steering wheel or full horn ring.  Reference Chrysler part number 2852491.

 		$ 24.95
HF-6704

This quality reproduction horn pad retainer kit is cut from the correct gauge steel and zinc phosphate and oiled to prevent corrosion.  Includes three 8-32 zinc plated mounting screws and correct 1/4-20 hex coni SEMS bolt to mount the horn pad to the plate.  Used on 1970 A & B-Body 3-spoke plastic steering wheels, applications w/o simulated wood steering wheel, Tuff Wheel, or full horn ring.  Reference Chrysler part number 2996704.

 		$ 24.95

              

 

 

RADIO FACEPLATES

 

 

RF-VPFP002

RF-VPFP001

RF-VPFP002

70 Charger/SE & 70 B Body w/ Rallye Dash w/ screws

$ 94.95

RF-VPFP001

68-69 Roadrunner/GTX/Satellite w/ screws

$ 94.95

RF-VP10169
RF-VP10168 
RF-VP10169 69 Charger (pebble grain faceplate) w/ screws $ 94.95
RF-VP10168 68 Charger (vertical line faceplate) w/ screws $ 94.95
WOODGRAIN RADIO BEZEL
MS-VFP003 1968-1969 Coronet/GTX (for thumbwheel type radio) $ 169.95

RADIO FACEPLATE SCREW KIT

TP-MP5580SCR

4 of the correct mounting screws for TP-MP5570 & TP-MP5550 above

$ 18.95/kit

 

 

INSIDE WINDOW CRANKS & DOOR COMPONENTS

Inside Door Handle

Challenger Inside Door Handles 

DH-704CU

DH-6870B

DH-714B

DH-704CH

DH-704CU

Inside Door Handles

70-74 Barracuda/Cuda

$ 59.95/pr.
DH-67B Inside Door Handles 66-67 B Body $ 69.95/pr.

DH-6870B

Inside Door Handles

68-70 B Body

$ 59.95/pr.

DH-714B

Inside Door Handles

71-74 B Body

$ 64.95/pr.

DH-704CH

Inside Door Handles

70-74 Challenger

$ 54.95/pr.

DH-6872A

Inside Door Handles

67-72 A Body

$ 59.95/pr.
DH-7376A

Inside Door Handles

73-76 A Body

 $ 69.95/pr.

DH-6870C

Inside Door Handles

66-70 C Body

$ 69.95/pr.
DH-6367A

Inside Door Handles

 63-66 A Body & 63-66 B Body

$ 64.95/pr.

1968-74 Dodge & Plymouth B & E Body Inside Window Crank handle

DH-395

DH-395R

CP-805183

DH-211242175

DH-395

Aftermarket Window Crank

1968-74 B & E Body

$ 19.99 ea.

DH-395R

Repro Window Crank (has the exact black knob as originals)

1968-74 B & E Body

$ 29.95 ea.

DH-395RPR $ 39.95/pr.

CP-805183

SCREW for above window cranks; chrome, Allen head 

 

$ 3.49 ea.

DH-211242175

Repro Window Crank

1975-78 B Body

$ 39.95 ea.

 

 

DH-396

DH-2111421672

MS-6176

MS-6717

DH-396

Repro Window Crank

1979 B Body

$ 19.95 ea.

DH-2111421672

SCREW for above two window cranks

1975-79 B Body

$ 4.50 ea.

MS-6176

Window Crank Spacer
(thin style)
Go between the window crank and door panel. 

Front Windows: 68-73 A Body, 68-69 Barracuda, 68-74 All B Body, 70-4 Challenger, 70-74 Barracuda & 68-69 C Body; Rear Windows: 68-69 Barracuda, 68-70 All B Body, 70-74 Challenger & 68-69 C Body 

$ 7.95 ea.

MS-6717

Window Crank Spacer
(thick style)
Go between the window crank and door panel. 

Front Windows: 74 Valiant & Dart (2 Dr & FB); Rear Windows: 71-74 All B Body 

$ 7.95 ea.

KQ-CW3

SR-270321

DH-635C

DH-635B

KQ-CW3

Window Crank Spacer (1/2" thick textured style) 
Go between the window crank and door panel. 

Rear Only Window: 70-74 Cuda

$ 9.95 ea.

SR-270321

Window Crank Shaft SPRING (goes over the spline shaft that the window crank goes on; pushes up against the inside of the door panel to keep the door spacer and crank tightly against the door panel)

62-76 All A & B Bodies (not used on 70-74 E Body)
4 per car needed

$ 4.95 ea.

DH-635C

Inside Door Lock Knob (Chrome)

All M & M (except 70-74 Cuda & Challenger)

$ 19.95 ea.

DH-635B

Inside Door Lock Knob (Black)

All M & M (except 70-74 Cuda & Challenger)

$ 19.95/pr.
       
  MS-V66CHCR MS-VQ67  MS-V65FSP
MS-V66CHCR Front Window Crank 1966-1967 Charger, All 1967 A & B Body & 1966-1967 C Body 44.95/pr. 
MS-VQ67 Vent Window Crank 1966-1967 All C Body 39.95 ea.
MS-V65FSP Window Crank Spacers - Black 1965 Sport Fury $ 49.95/set of 6
       
 MS-V67ASP MS-VCS001 MS-VQ6366 MS-V6366
MS-V67ASP Window Crank Spacers - Black 67 Dart/Barracuda $ 49.95/set of 6 
MS-VCS001 Window Crank Spacers - Chrome 1966-1967 Charger $ 59.95/pr. 
MS-VQ6366 Rear Quarter Window Crank  1963-1966 All (exc. 66 Chgr)
(64-66 Barracuda, 62-66 Valiant, 63-66 Dart, 62-66 Belvedere, 65 Coronet & 65-66 Satellite)		 $ 39.95 ea.
MS-V6366 Front Window Crank  1962-1966 All ( exc. 66 Chgr)
(64-66 Barracuda, 62-66 Valiant, 63-66 Dart, 62-66 Belvedere, 65 Coronet & 65-66 Satellite)		 $ 49.95/pr.
INSIDE WINDOW CRANK KITS

All kits consist of four correct looking window cranks, four window crank spacers & four attaching screws. 		Window Crank Kit
DH-3115 1968-74 All B Body & 1970-74 Challenger $ 74.95/kit
DH-3110 1970-74 Barracuda $ 74.95/kit
DH-3100 1968-74 All A Body $ 74

.95/kit

 

DH-2111491691

DH-2111491692

DH-704DL

MS-6703

DH-2111491691

Inside Door Lock Knob (Black) 

1975-79 B Body

$ 8.95 ea.

DH-2111491692

Inside Door Lock Knob (Chrome)

1975-79 B Body

$ 8.95 ea.

DH-704DL

Inside Door Lock Knob; (Chrome with black "LOCK" lettering)

1970-74 Cuda & Challenger

$ 39.95/pr.

DOOR LOCK FERRULES

MS-6703

68-70 Charger

Door Lock Ferrules

$ 29.95/pr.

 

MS-6704

MS-6704A

SR-180234

  

MS-6704

68-70 B Body (exc. Charger) 

Door Lock Ferrules - Stainless steel snap into place on your door panel; surrounds door lock knob)

$ 29.95/pr.

MS-6704A

69-74 All A Body

Door Lock Ferrules - Same as above except clear plastic

$ 29.95/pr.

SR-180234

72-76 A Body

Door Lock Ferrules - Stainless Steel

$ 29.95/pr.

DOOR POST STRIKERS

MS-899

MS-899

MS-899

67-74 A Body, 70-74 E Body & 71-74 B Body
These strikers have the correct "star" pattern in the center, unlike the cheaper and incorrect strikers with "allen head" that are on the market. These come with a thick and a thin spacer washer. Also features gold cadium plated roller. These are 100% original in appearance.

Right & Left same

$ 54.95 ea.
 
  DOOR MECHANISM ATTACHING BOLTS
These concours quality, NOS attaching bolts are the bolts with the special head that hold the door lock mechanism located on the rear of the door. 		Door Mechanism Attaching Bolts
MS-900 All Year, Make & Model Set of 3 $ 59.95/kit

DOOR JAMB LATCH RECEIVER KIT
Includes two door jam latches, six screws and six star washers.
MS-59971 64-66 A Body, 64-70 B Body & 65-68 C Body   $ 189.95/kit

 

FRONT DOOR WINDOW REGULATORS

These front door window regulators are for models with manual windows. New unless otherwise noted.

66-70 B Body Window Regulator
 MS-5451466L
MS-5451570
 
MS-6772AFWUR		  
MS-6772AFWUR (reverse)
MS-6772AFWUR 1967-72 All A Body
(including 67-69 Cuda)		 Right $ 189.95
Excellent Used
MS-6772AFWUL 1967-72 All A Body
(including 67-69 Cuda)		 Left $ 189.95
Excellent Used

MS-5452570R

1970 Challenger 

Right

$ 299.95 ea.

MS-5452570L

1970 Challenger

Left

$ 299.95 ea.

MS-5452571R

1971-74 Challenger

Right

$ 299.95 ea.

MS-5452571L

1971-74 Challenger

Left

$ 299.95 ea.
MS-5451466R 1966-70 B Body
(exc. 66 Charger)

Right

 $ 299.95 ea.
MS-5451466L 1966-70 B Body
(exc. 66 Charger)

Left

 $ 299.95 ea.
MS-VEG0L

1970 Barracuda

Right

 $ 299.95 ea.
MS-VEG0R

1970 Barracuda

Left

 $ 299.95 ea.
MS-VEG04R

1971-74 Barracuda

Right

 $ 299.95 ea.
MS-VEG04L

1971-74 Barracuda

Left

 $ 299.95 ea.
MS-47795U 1966-70 B Body
(exc. 66 Charger)

Right

 $ 199.95 ea.
Excellent Used
MS-47796U 1966-70 B Body
(exc. 66 Charger)

Left

 $ 199.95 ea.
Excellent Used

 

 

REAR VIEW MIRROR BRACKET

This is the bracket both the rear view mirror attached to and the sun visor  tips push into.

MS-820

70-72 Duster/Demon; 71-72 Dart/Valiant; 71-74 B Body, 68-70 All B Body  & 70-74 Cuda/Challenger (exc. conv)

$ 99.95

              

 

Back to Interior Page