All Year, Make & Model - Big Block & Hemi

$ 18.95

STANDARD TRANS FLYWHEEL TO CRANKSHAFT BOLTS

All Small & Big Block engines (6 needed)

$ 6.95

All 426 Hemi (8 needed)

$ 8.95

ROCKER ARM SHAFT SPACERS
(where bolt goes thru rocker shaft)

SHORT (need 3 per side)

All 318, 340 & 360 engines 

$ 6.95

LONG (need 2 per side)

All 318, 340 & 360 engines 

$ 6.95

ROCKER ARM SHAFTS

All 68-Up 318, 340 & 360 engines

$ 59.95

ROCKER ARM ADJUSTING NUTS

340 Six Pack 

$ 1.49

426 HEMI ROCKER STAND SETS

1966-71 426 Street Hemi (these are cast iron exactly like the originals; sold as a complete set enough for one engine)

$ 649.95/set

WATER TEMPERATURE SENDING UNITS

All Year Make & Model w/ dash gauge

$ 29.95

All Year Make & Model w/ indicator light

$ 29.95

Round Emission CHARCOAL CANISTER

FILTER for above charcoal canister

$ 29.95

Charcoal Canister - 73-75 All A, B & E Body (with 3 hose top of canister connection) [NOS Original] (Black plastic)

$ 399.95

Charcoal Canister - 72 All A, B & E Body (with 4 hose top of canister connection) [NOS Original] (Black plastic)

Sold Out

Small Block

TIMING CHAIN COVERS

EG-TD9392

All 70-74 318, 340 & 360 engines

$ 229.95

All 67-69 273, 318 & 340 engines

$ 149.95

Timing Chain Cover GASKET - 70-Up Small Block

$ 16.95

TIMING CHAIN COVER OIL SEALS

Timing Chain Cover OIL SEAL - All Small Block

$ 12.95

Timing Chain Cover OIL SEAL  - All Big Block

$ 12.95

VARIOUS CAMSHAFT PARTS

EG-981KIT

Camshaft THRUST PLATE TENSIONER
(holds camshaft from moving forward)

All Yr Small Block engines

Thrust Plate OILER BOLT
(this special bolt is thru-drilled for oil passage; its one of the four bolts that mount the thrust plate to the block; the other three bolts are standard bolts)

All Yr Small Block engines

Temp Disc

Camshaft Timing Gear Attaching "WASHER & BOLT"
(goes inside the eccentric)

All Yr Small Block engines

$ 29.95

Camshaft Timming Gear Attaching "WASHER & BOLT"

Fits all Big Blocks (exc. 440+6 & Hemi)

$ 32.95

VARIOUS HEAD COMPONENTS

Head Bolt - Short (need 5 per head)

All 318, 340 & 360 engines

$ 8.95

Head Bolt - Medium (need 4 per head)

All 318, 340 & 360 engines

$ 8.95

Head Bolt - Long (need 1 per head)

All 318, 340 & 360 engines

$ 8.95

Head Bolt - Short

All 361, 383, 400, 426 Wedge & 440 engines 

$ 12.95

Head Bolt - Long

All 361, 383, 400, 426 Wedge & 440 engines

$ 12.95

Cylinder Head Attaching Bolt Kits (set includes 20 bolts)

67-Up All Small Block engines

$ 139.95/kit

Cylinder Head Attaching Bolt Kits (set includes 34 bolts)

All Big Block engines

$ 69.95/kit

Cylinder Head & Stud Kit (Grade 8 machine quality bolts for all 66-71 426 Hemi engines. Includes head bolts, washers & valley studs, washers & nuts)

All 426 Hemi engines

$ 219.95/kit

VARIOUS CRANKSHAFT COMPONENTS

Crankshaft Main Cap Bolts

All Big Blocks

$ 9.95

Crankshaft Main Cap Bolts

All Small Blocks

$ 9.95

Crankshaft Main Cap Bolts

66-71 426 Hemi

$ 13.95

4 Speed Crankshaft PILOT BUSHING 

All Years & Engines

$ 18.95

CRANKSHAFT PULLEYS

69-71 426 Hemi only w/o power steering

Single groove

$ 139.95

66-68 426 Hemi only w/o power steering

Single groove

$ 139.95

69-71 426 Hemi w/ power steering

Double groove

$ 219.95

1972 318/340 & 1973-74 318 w/ power steering and no air conditioning 

Double groove

$ 159.95

68-72 All Big Block w/ power steering

Double groove

$ 159.95

VARIOUS INTAKE MANIFOLD COMPONENTS

HF-HWC8047

HF-HWC8072

SIX PACK INTAKE MANIFOLD INSTALLATION FASTENER KIT (Six Pack kits include all fasteners needed to install the special components of a six pack system. Includes fasteners for: coil, throttle cable bracket, carbs, solenoid, choke, intake manifold and thermostat housing (sm blk only). Also includes air cleaner studs and wing nuts).

All 340 Six Packs 

$ 99.95/kit

All 440 Six Packs

DISC

Intake Manifold Bolts (correct marked factory bolts)

All Big Block engines

$ 2.95

Chrome Intake Manifold Bolts

All Small & Big Block engines

$ 2.95

Intake Bolt & Stud Kit

All 426 Hemi engines

$ 225.95/kit

Intake Manifold Heat Shield (shields the bottom of the intake from hot oil; includes hardware and instructions; original Chrysler)

All 426 Hemi engines

$ 85.95/set

Intake Manifold Gaskets (special 4-piece set; helps stop intake manifold leaks)

All Big Blocks w/ aluminum intakes 

$ 25.95/set

VARIOUS EXHAUST MANIFOLD COMPONENTS

Exhaust Manifold Gaskets - Hemi

$ 16.95 

VARIOUS BLOCK COMPONENTS

Engine Block Drain Petcocks

All Engines (1/8")

$ 3.95

Engine Block Drain Petcocks

All Engines (1/4")

$ 3.95

Engine Block to Firewall GROUND STRAP 

All Engines

$ 34.95

Rear Main Seal ALUMINUM CAP (houses rear main seal)

All Year Big Block & 66-71 Hemi

Good Used only
Please call

Rear Main Seal Aluminum Cap SPECIAL BOLT

All Year Big Block & Hemi

$ 59.95 each

Oil Pressure HEAT SHIELD 

All 426 Hemi Engines

$ 10.95

VALVE COVER COMPONENTS

1 Outlet BREATHER CAP (Black; with 1 Large Outlet & "Oil" lettering on top)

All 65-69 All Small & Big Block & Hemi

$ 259.95

2 Outlet BREATHER CAP (Black; with 1 Large & 1 Small Outlet)

All 70-Up Small, Big Block & 426 Hemi

$ 279.95

3 Outlet BREATHER CAP (Black; with 1 Large & 2 Small Outlets)

All 70-Up Small, Big Block & 426 Hemi

$ 299.95

Valve Cover BREATHER CAP (Chrome Push-on; re-issue of originals)

$ 69.95

Valve Cover Breather GROMMET (Round; fits in valve cover)

All engines

$ 12.95

NOS Valve Cover OIL FILLER CAP (Chrome; Twist-on; Has correct "S" designation on the center of rivet, as original)

70-72 V8 engines (including 426 Hemi engines; also fits various others that came with same style painted caps)

$ 69.95

Valve Cover STUDS (screw into heads)

All Small & Big Blocks (need 6 per head); All 426 Hemi (need 10 per head)

$ 2.95

Valve Cover HOLD DOWN NUT (1/4" nut w/ washer attached)

66-74 All Engines

$ 2.95

Set of 20 above 

$ 39.95/set

PCV VALVE (Metal style; correct black color)

64-69 All Make, Model & Engines

$ 119.95

PCV VALVE (Plastic style)

72-84 All Engines

$ 18.95

$ 44.95

$ 44.95

PCV Valve Cover GROMMET (Round)

All Make, Model & Engines

$ 14.95

Valve Cover GASKETS

All Small Block (original cork type w/ tabs)

$ 39.95/pr.

PCV & POWER BRAKE BOOSTER HOSE

This is the correct Gates 11/32" hose marked and date coded with the same diameter as original. Sold by the foot.  

January 1969 Gates Hose 

$ 14.95/ft.

January 1970 Gates Hose 

$ 14.95/ft.

July 1968 Gates Hose 

$ 14.95/ft.

July 1969 Gates Hose 

$ 14.95/ft.

July 1970 Gates Hose 

$ 14.95/ft.

July 1971 Gates Hose 

$ 14.95/ft.

ENGINE BLOCK FREEZE PLUG KITS

Brass Kit 

All Small Blocks

$ 37.00/kit

Brass Kit

All Big Blocks

$ 37.00/kit

Steel Kit

All Small Blocks

$ 29.50/kit

Steel Kit

All Big Blocks

$ 29.50/kit

Teflon Sealing TAPE (1/2" X 260")

$ 13.95

Asst. Vacuum Line PLUG KIT (for blocking off vacuum lines & fittings not needed)

$ 16.95/kit

POINT PRIMARY LEAD WIRE (for use with 64-71 single point distributors only; this is the wire that connects the points to the ignition coil)

$ 69.95

ENGINE MOTOR MOUNT STEEL BRACKETS

ENGINE MOTOR MOUNT RUBBER BRACKETS

EG-1832

67-72 A Body (273, 318 & 340)

Left or Right, same

$ 29.95

67-72 A Body (273, 318 & 340) - Solid Motor Mounts (not the rubber type; replaces rubber type mounts; use with stock motor mount brackets)

Sold in pairs

$ 89.95/pr.

66-72 B Body (273, 318, 361, 383, 400 & 440) & 70-74 E Body (318, 340 & 360)

Left or Right, same

$ 29.95

70-71 E Body (all Big Block engines exc. Hemi) 

Left or Right, same

$ 29.95

66-70 B Body (426 Hemi)

Left side

$ 269.95

BOLT (for use with above EG-6787)

$ 2.25

66-71 B Body & 70-71 E Body (426 Hemi)

Right side

$ 39.95

71 B Body & 70-71 E Body (426 Hemi)

Left side

$ 269.95

HIGH PERFORMANCE RUBBER ENGINE MOTOR MOUNTS
These heavy duty motor mounts are the only set you'll ever need to buy! These mounts have a patent-pending design that eliminates the chronic problem of the separating of the plate from the rubber insulator. Same appearance as originals, can be used in a show car or strip car.

66-72 B Body & 70-74 E Body (all V-8 engines exc. Hemi)

$ 199.95/pr.

66-72 A Body (all V-8 engines)

$ 199.95/pr.

HARMONIC BALANCERS

All 65-69 Small Blocks

$ 239.95

All 70-71 Small Blocks

$ 239.95

All 65-71 Big Blocks (exc. 70-71 440 hp, 440+6 or 426 Hemi)

$ 229.95

All 72 340 engines & 72-74 318 engines 

$ 189.95

HARMONIC BALANCER RELATED COMPONENTS

Center Crankshaft Harmonic Balancer Large Hold On BOLT - All 67-71 w/ 318, 340, 360 & 426 Hemi engines

$ 16.95

Center Crankshaft Harmonic Balancer Large Hold On BOLT - All 65-74 w/ Big Block engines (this and EG-1033 hold front engine balancer on crankshaft) 

$ 18.95

LARGE SPECIAL WASHER - All V8 engines (for above harmonic balancer hold on bolt)

$ 13.95

CHAIN OILSLINGER - All year with V8 engines (fits between balancer & bottom timing gear; large flat shaped steel)

$ 59.95

Front Balancer KEYWAY - All engines (fits in crankshaft & holds balancer from spinning on crankshaft)

$16.95

TIMING TAPE - for all Small & Big Block crankshaft balancers (allows accurate ignition timing)

$ 7.95